Communications satellites are used for military communications applications, such as Global Command and Control Systems. Examples of military systems that use use communication satellites are the MILSTAR, the DSCS, and the FLTSATCOM of the United States, NATO satellites, United Kingdom satellites, and satellites of the former Soviet Union. Many military satellites operate in the X-band, and some also use UHF radio links, while MILSTAR also utilizes Ka band.
Submarine communications cable
A submarine communications cable is a cable laid beneath the sea to carry telecommunications between countries.
The first submarine communications cables carried telegraphy traffic. Subsequent generations of cables carried first telephony traffic, then data communications traffic. All modern cables use optical fiber technology to carry digital payloads, which are then used to carry telephone traffic as well as Internet and private data traffic. They are typically 69 millimetres (2.7 in) in diameter and weigh around 10 kilograms per meter (7 lb/ft), although thinner and lighter cables are used for deep-water sections.[1]
As of 2003, submarine cables link all the world's continents except Antarctica.
The first submarine communications cables carried telegraphy traffic. Subsequent generations of cables carried first telephony traffic, then data communications traffic. All modern cables use optical fiber technology to carry digital payloads, which are then used to carry telephone traffic as well as Internet and private data traffic. They are typically 69 millimetres (2.7 in) in diameter and weigh around 10 kilograms per meter (7 lb/ft), although thinner and lighter cables are used for deep-water sections.[1]
As of 2003, submarine cables link all the world's continents except Antarctica.
Trials
After William Cooke and Charles Wheatstone had introduced their working telegraph in 1839, the idea of a submarine line across the Atlantic Ocean began to be thought of as a possible triumph of the future. Samuel Morse proclaimed his faith in it as early as the year 1840, and in 1842 he submerged a wire, insulated with tarred hemp and India rubber,[2][3] in the water of New York harbour, and telegraphed through it. The following autumn Wheatstone performed a similar experiment in Swansea bay. A good insulator to cover the wire and prevent the electric current from leaking into the water was necessary for the success of a long submarine line. India rubber had been tried by Moritz von Jacobi, the Prussian electrical engineer, as far back as the early 1800s.
Another insulating gum which could be melted by heat and readily applied to wire made its appearance in 1842. Gutta-percha, the adhesive juice of the Palaquium gutta tree, was introduced to Europe by William Montgomerie, a Scottish surgeon in the service of the British East India Company. Twenty years earlier he had seen whips made of it in Singapore, and he believed that it would be useful in the fabrication of surgical apparatuses. Michael Faraday and Wheatstone soon discovered the merits of gutta-percha as an insulator, and in 1845 the latter suggested that it should be employed to cover the wire which was proposed to be laid from Dover to Calais. It was tried on a wire laid across the Rhine between Deutz and Cologne. In 1849 C.V. Walker, electrician to the South Eastern Railway, submerged a wire coated with it, or, as it is technically called, a gutta-percha core, along the coast off Dover.
The first commercial cables
In August 1850, John Watkins Brett's Anglo-French Telegraph Company laid the first line across the English Channel. It was simply a copper wire coated with gutta-percha, without any other protection. The experiment served to keep alive the concession, and the next year, on November 13, 1851, a protected core, or true cable, was laid from a government hulk, the Blazer, which was towed across the Channel. The next year, Great Britain and Ireland were linked together. In 1852, a cable laid by the Submarine Telegraph Company linked London to Paris for the first time. In May, 1853, England was joined to the Netherlands by a cable across the North Sea, from Orford Ness to The Hague. It was laid by the Monarch, a paddle steamer which had been fitted for the work.
The first commercial cables
In August 1850, John Watkins Brett's Anglo-French Telegraph Company laid the first line across the English Channel. It was simply a copper wire coated with gutta-percha, without any other protection. The experiment served to keep alive the concession, and the next year, on November 13, 1851, a protected core, or true cable, was laid from a government hulk, the Blazer, which was towed across the Channel. The next year, Great Britain and Ireland were linked together. In 1852, a cable laid by the Submarine Telegraph Company linked London to Paris for the first time. In May, 1853, England was joined to the Netherlands by a cable across the North Sea, from Orford Ness to The Hague. It was laid by the Monarch, a paddle steamer which had been fitted for the work.
Transatlantic telegraph cable
The transatlantic telegraph cable was the first cable used for telegraph communications laid across the floor of the Atlantic Ocean. It crossed from Foilhommerum, Valentia Island, in western Ireland to Heart's Content in eastern Newfoundland. The transatlantic cable bridged North America and Europe, and expedited communication between the two. Whereas it would normally take at least ten days to deliver a message by ship, it now took a matter of minutes by telegraph.
Five attempts to lay it were made over a nine-year period—in 1857, two in 1858, in 1865, and in 1866—before lasting connections were finally achieved by the SS Great Eastern captained by Sir James Anderson with the 1866 cable and the repaired 1865 cable. Additional cables were laid between Foilhommerum and Heart's Content in 1873, 1874, 1880 and 1894. By the end of the 19th century, British-, French-, German- and American-owned cables linked Europe and North America in a sophisticated web of telegraphic communications.
Cyrus West Field was the force behind the first transatlantic telegraph cable, attempted unsuccessfully in 1857 and completed on August 5, 1858. Although not considered particularly successful or long-lasting, it was the first transatlantic cable project to yield practical results. The first official telegram to pass between two continents was a letter of congratulation from Queen Victoria of the United Kingdom to the President of the United States James Buchanan on August 16. The cable was destroyed the following month when Wildman Whitehouse applied excessive voltage to it while trying to achieve faster telegraph operation. The shortness of the period of use undermined public and investor confidence in the project, and delayed efforts to restore a connection. A next attempt was undertaken in 1865 with much-improved material and, following some setbacks, a connection was completed and put into service on July 28, 1866. This time the connection was more durable, and increased public confidence resulted when the 1865 cable was repaired and put into service shortly afterwards.
Whereas previously communication could only happen over ship, the transatlantic telegraph cable sped up communication to within minutes, allowing communication to happen within the same day. In the 1870s, duplex and quadruplex transmission and receiving systems were set up that could relay multiple messages over the cable. In cross-Atlantic currency trading, the pound sterling came to be referred as "cable" and to this day a cable in financial jargon is one million pounds[1]. The great utility of the cable built on itself, and multiple cables were established soon afterward.
Five attempts to lay it were made over a nine-year period—in 1857, two in 1858, in 1865, and in 1866—before lasting connections were finally achieved by the SS Great Eastern captained by Sir James Anderson with the 1866 cable and the repaired 1865 cable. Additional cables were laid between Foilhommerum and Heart's Content in 1873, 1874, 1880 and 1894. By the end of the 19th century, British-, French-, German- and American-owned cables linked Europe and North America in a sophisticated web of telegraphic communications.
Cyrus West Field was the force behind the first transatlantic telegraph cable, attempted unsuccessfully in 1857 and completed on August 5, 1858. Although not considered particularly successful or long-lasting, it was the first transatlantic cable project to yield practical results. The first official telegram to pass between two continents was a letter of congratulation from Queen Victoria of the United Kingdom to the President of the United States James Buchanan on August 16. The cable was destroyed the following month when Wildman Whitehouse applied excessive voltage to it while trying to achieve faster telegraph operation. The shortness of the period of use undermined public and investor confidence in the project, and delayed efforts to restore a connection. A next attempt was undertaken in 1865 with much-improved material and, following some setbacks, a connection was completed and put into service on July 28, 1866. This time the connection was more durable, and increased public confidence resulted when the 1865 cable was repaired and put into service shortly afterwards.
Whereas previously communication could only happen over ship, the transatlantic telegraph cable sped up communication to within minutes, allowing communication to happen within the same day. In the 1870s, duplex and quadruplex transmission and receiving systems were set up that could relay multiple messages over the cable. In cross-Atlantic currency trading, the pound sterling came to be referred as "cable" and to this day a cable in financial jargon is one million pounds[1]. The great utility of the cable built on itself, and multiple cables were established soon afterward.
Cable to India, Singapore, Far East and Australasia
An 1863 cable to Bombay provided a crucial link to Saudi Arabia.[4] In 1870 Bombay was linked to London via submarine cable in a combined operation by four cable companies, at the behest of the British Government. In 1872 these four companies were combined to form the mammoth globespanning Eastern Telegraph Company, owned by John Pender. A spin-off from Eastern Telegraph Company was a second sister company, the Eastern Extension, China and Australasia Telegraph Company, commonly known simply as "the Extension". In 1872, Australia was linked by cable to Bombay via Singapore and China and in 1876 the cable linked the British Empire from London to New Zealand.
Submarine cable across the Pacific
This was completed in 1902–03, linking the US mainland to Hawaii in 1902 and Guam to the Philippines in 1903.[5] Canada, Australia, New Zealand and Fiji were also linked in 1902.[6]
The North Pacific Cable system was the first regenerative (repeatered) system to completely cross the Pacific from the US mainland to Japan. The US portion of NPC was manufactured in Portland, Oregon, from 1989–1991 at STC Submarine Systems, and later Alcatel Submarine Networks. (The plant was shut down in 2001.) The system was laid by Cable & Wireless Marine on the CS Cable Venture in 1991.
Construction
Transatlantic cables of the 19th century consisted of an outer layer of iron and later steel wire, wrapping India rubber, wrapping gutta-percha, which surrounded a multi-stranded copper wire at the core. The portions closest to each shore landing had additional protective armor wires. Gutta-percha, a natural polymer similar to rubber, had nearly ideal properties for insulating submarine cables, with the exception of a rather high dielectric constant which made cable capacitance high. Gutta-percha was not replaced as a cable insulation until polyethylene was introduced in the 1930s. In the 1920s, the American military experimented with rubber-insulated cables as an alternative to gutta-percha, since American interests controlled significant supplies of rubber but no gutta-percha manufacturers.
Bandwidth problems
Early long-distance submarine telegraph cables exhibited formidable electrical problems. Unlike modern cables, the technology of the 19th century did not allow for in-line repeater amplifiers in the cable. Large voltages were used to attempt to overcome the electrical resistance of their tremendous length but the cables' distributed capacitance and inductance combined to distort the telegraph pulses in the line, severely limiting the data rate for telegraph operation. Thus, the cables had very limited bandwidth.
As early as 1823,[citation needed] Francis Ronalds had observed that electric signals were retarded in passing through an insulated wire or core laid underground, and the same effect was noticed by Latimer Clark (1853) on cores immersed in water, and particularly on the lengthy cable between England and The Hague. Michael Faraday showed that the effect was caused by capacitance between the wire and the earth (or water) surrounding it. Faraday had noted that when a wire is charged from a battery (for example when pressing a telegraph key), the electric charge in the wire induces an opposite charge in the water as it travels along. As the two charges attract each other, the exciting charge is retarded. The core acts as a capacitor distributed along the length of the cable which, coupled with the resistance and inductance of the cable limits the speed at which a signal travels through the conductor of the cable.
Early cable designs failed to analyze these effects correctly. Famously, E.O.W. Whitehouse had dismissed the problems and insisted that a transatlantic cable was feasible. When he subsequently became electrician of the Atlantic Telegraph Company he became involved in a public dispute with William Thomson. Whitehouse believed that, with enough voltage, any cable could be driven. Because of the excessive voltages recommended by Whitehouse, Cyrus West Field's first transatlantic cable never worked reliably, and eventually short circuited to the ocean when Whitehouse increased the voltage beyond the cable design limit.
Thomson designed a complex electric-field generator that minimized current by resonating the cable, and a sensitive light-beam mirror galvanometer for detecting the faint telegraph signals. Thomson became wealthy on the royalties of these, and several related inventions. Thomson was elevated to Lord Kelvin for his contributions in this area, chiefly an accurate mathematical model of the cable, which permitted design of the equipment for accurate telegraphy. The effects of atmospheric electricity and the geomagnetic field on submarine cables also motivated many of the early polar expeditions.
Thomson had produced a mathematical analysis of propagation of electrical signals into telegraph cables based on their capacitance and resistance, but since long submarine cables operated at slow rates, he did not include the effects of inductance. By the 1890s, Oliver Heaviside had produced the modern general form of the telegrapher's equations which included the effects of inductance and which were essential to extending the theory of transmission lines to higher frequencies required for high-speed data and voice.
Transatlantic telephony
While laying a transatlantic telephone cable was seriously considered from the 1920s, a number of technological advances were required for cost-efficient telecommunications that did not arrive until the 1940s. A first attempt to lay a pupinized telephone cable failed in the early 1930s due to the Great Depression.
In 1942, Siemens Brothers of Charlton, London in conjunction with the United Kingdom National Physical Laboratory, adapted submarine communications cable technology to create the world's first submarine oil pipeline in Operation Pluto during World War II.
TAT-1 (Transatlantic No. 1) was the first transatlantic telephone cable system. Between 1955 and 1956, cable was laid between Gallanach Bay, near Oban, Scotland and Clarenville, Newfoundland and Labrador. It was inaugurated on September 25, 1956, initially carrying 36 telephone channels.
In the 1960s, transoceanic cables were coaxial cables that transmitted frequency-multiplexed voiceband signals. A high voltage direct current on the inner conductor powered the repeaters. The first-generation repeaters are among the most reliable vacuum tube amplifiers ever designed.[7] Later ones were transistorized. Many of these cables are still usable, but abandoned because their capacity is too small to be commercially viable. Some have been used as scientific instruments to measure earthquake waves and other geomagnetic events.[8]
In 1942, Siemens Brothers of Charlton, London in conjunction with the United Kingdom National Physical Laboratory, adapted submarine communications cable technology to create the world's first submarine oil pipeline in Operation Pluto during World War II.
TAT-1 (Transatlantic No. 1) was the first transatlantic telephone cable system. Between 1955 and 1956, cable was laid between Gallanach Bay, near Oban, Scotland and Clarenville, Newfoundland and Labrador. It was inaugurated on September 25, 1956, initially carrying 36 telephone channels.
In the 1960s, transoceanic cables were coaxial cables that transmitted frequency-multiplexed voiceband signals. A high voltage direct current on the inner conductor powered the repeaters. The first-generation repeaters are among the most reliable vacuum tube amplifiers ever designed.[7] Later ones were transistorized. Many of these cables are still usable, but abandoned because their capacity is too small to be commercially viable. Some have been used as scientific instruments to measure earthquake waves and other geomagnetic events.[8]
Optical telephone cables
In the 1980s, fiber optic cables were developed. The first transatlantic telephone cable to use optical fiber was TAT-8, which went into operation in 1988. A fiber-optic cable comprises multiple pairs of fibers. Each pair has one fiber in each direction. TAT-8 had two operational pairs and one backup pair.
Modern optical fiber repeaters use a solid-state optical amplifier, usually an Erbium-doped fiber amplifier. Each repeater contains separate equipment for each fiber. These comprise signal reforming, error measurement and controls. A solid-state laser dispatches the signal into the next length of fiber. The solid-state laser excites a short length of doped fiber that itself acts as a laser amplifier. As the light passes through the fiber, it is amplified. This system also permits wavelength-division multiplexing, which dramatically increases the capacity of the fiber.
Repeaters are powered by a constant direct current passed down the conductor near the center of the cable, so all repeaters in a cable are in series. Power feed equipment is installed at the terminal stations. Typically both ends share the current generation with one end providing a positive voltage and the other a negative voltage. A virtual earth point exists roughly half way along the cable under normal operation. The amplifiers or repeaters derive their power from the potential difference drop across them.
The optic fiber used in undersea cables is chosen for its exceptional clarity, permitting runs of more than 100 kilometers between repeaters to minimize the number of amplifiers and the distortion they cause.
Originally, submarine cables were simple point-to-point connections. With the development of submarine branching units (SBUs), more than one destination could be served by a single cable system. Modern cable systems now usually have their fibers arranged in a self-healing ring to increase their redundancy, with the submarine sections following different paths on the ocean floor. One driver for this development was that the capacity of cable systems had become so large that it was not possible to completely back-up a cable system with satellite capacity, so it became necessary to provide sufficient terrestrial back-up capability. Not all telecommunications organizations wish to take advantage of this capability, so modern cable systems may have dual landing points in some countries (where back-up capability is required) and only single landing points in other countries where back-up capability is either not required, the capacity to the country is small enough to be backed up by other means, or having back-up is regarded as too expensive.
A further redundant-path development over and above the self-healing rings approach is the "Mesh Network" whereby fast switching equipment is used to transfer services between network paths with little to no effect on higher-level protocols if a path becomes inoperable. As more paths become available to use between two points, the less likely it is that one or two simultaneous failures will prevent end-to-end service.
Modern optical fiber repeaters use a solid-state optical amplifier, usually an Erbium-doped fiber amplifier. Each repeater contains separate equipment for each fiber. These comprise signal reforming, error measurement and controls. A solid-state laser dispatches the signal into the next length of fiber. The solid-state laser excites a short length of doped fiber that itself acts as a laser amplifier. As the light passes through the fiber, it is amplified. This system also permits wavelength-division multiplexing, which dramatically increases the capacity of the fiber.
Repeaters are powered by a constant direct current passed down the conductor near the center of the cable, so all repeaters in a cable are in series. Power feed equipment is installed at the terminal stations. Typically both ends share the current generation with one end providing a positive voltage and the other a negative voltage. A virtual earth point exists roughly half way along the cable under normal operation. The amplifiers or repeaters derive their power from the potential difference drop across them.
The optic fiber used in undersea cables is chosen for its exceptional clarity, permitting runs of more than 100 kilometers between repeaters to minimize the number of amplifiers and the distortion they cause.
Originally, submarine cables were simple point-to-point connections. With the development of submarine branching units (SBUs), more than one destination could be served by a single cable system. Modern cable systems now usually have their fibers arranged in a self-healing ring to increase their redundancy, with the submarine sections following different paths on the ocean floor. One driver for this development was that the capacity of cable systems had become so large that it was not possible to completely back-up a cable system with satellite capacity, so it became necessary to provide sufficient terrestrial back-up capability. Not all telecommunications organizations wish to take advantage of this capability, so modern cable systems may have dual landing points in some countries (where back-up capability is required) and only single landing points in other countries where back-up capability is either not required, the capacity to the country is small enough to be backed up by other means, or having back-up is regarded as too expensive.
A further redundant-path development over and above the self-healing rings approach is the "Mesh Network" whereby fast switching equipment is used to transfer services between network paths with little to no effect on higher-level protocols if a path becomes inoperable. As more paths become available to use between two points, the less likely it is that one or two simultaneous failures will prevent end-to-end service.
Cable repair
Cables can be broken by fishing trawlers, anchoring, undersea avalanches and even shark bites. Breaks were common in the early cable laying era due to the use of simple materials and the laying of cables directly on the ocean floor rather than burying the cables in trenches in more vulnerable areas. Cables were also sometimes cut by enemy forces in wartime. Cable breaks are by no means a thing of the past, with more than 50 repairs a year in the Atlantic alone,[9] and significant breaks in 2006 and 2008.
To effect repairs on deep cables, the damaged portion is brought to the surface using a grapple. Deep cables must be cut at the seabed and each end separately brought to the surface, whereupon a new section is spliced in. The repaired cable is longer than the original, so the excess is deliberately laid in a 'U' shape on the seabed. A submersible can be used to repair cables that lie in shallower waters.
A number of ports near important cable routes became homes to specialised cable repair ships. Halifax, Nova Scotia was home to a half dozen such vessels for most of the 20th century including long-lived vessels such as the CS Cyrus West Field, CS Minia and CS Mackay-Bennett. The latter two were contracted to recover victims from the sinking of the RMS Titanic. The crews of these vessels developed many new techniques and devices to repair and improve cable laying, such as the "plough
Intelligence gathering
Underwater cables, which cannot be kept under constant surveillance, have tempted intelligence-gathering organizations since the late 19th century. Frequently at the beginning of wars nations have cut the cables of the other sides in order to shape the information flows into cables that were being monitored. The most ambitious efforts occurred in World War I, when British and German forces systematically attempted to destroy the others' worldwide communications systems by cutting their cables with surface ships or submarines.[10] During the Cold War the United States Navy and National Security Agency (NSA) succeeded in placing wire taps on Soviet underwater communication lines in Operation Ivy Bells.
Notable events
The Newfoundland earthquake of 1929 broke a series of trans-Atlantic cables by triggering a massive undersea avalanche. The sequence of breaks helped scientists chart the progress of the avalanche.
In July 2005, a portion of the SEA-ME-WE 3 submarine cable located 35 kilometres (22 mi) south of Karachi that provided Pakistan's major outer communications became defective, disrupting almost all of Pakistan's communications with the rest of the world, and affecting approximately 10 million Internet users.[11][12][13]
The 2006 Hengchun earthquake on December 26, 2006 rendered numerous cables near Taiwan inoperable.
In March, 2007, pirates stole an 11 kilometres (6.8 mi) section of the T-V-H submarine cable that connected Thailand, Vietnam, and Hong Kong, affecting Vietnam's Internet users with far slower speeds. The thieves attempted to sell the 100 tons of illicit cargo as scrap.[14]
The 2008 submarine cable disruption was a series of cable outages, two of the three Suez Canal cables, two disruptions in the Persian Gulf, and one in Malaysia. It caused massive communications disruptions to India and the Middle East.
Submarine communications cable
A submarine communications cable is a cable laid beneath the sea to carry telecommunications between countries.
The first submarine communications cables carried telegraphy traffic. Subsequent generations of cables carried first telephony traffic, then data communications traffic. All modern cables use optical fiber technology to carry digital payloads, which are then used to carry telephone traffic as well as Internet and private data traffic. They are typically 69 millimetres (2.7 in) in diameter and weigh around 10 kilograms per meter (7 lb/ft), although thinner and lighter cables are used for deep-water sections.[1]
The first submarine communications cables carried telegraphy traffic. Subsequent generations of cables carried first telephony traffic, then data communications traffic. All modern cables use optical fiber technology to carry digital payloads, which are then used to carry telephone traffic as well as Internet and private data traffic. They are typically 69 millimetres (2.7 in) in diameter and weigh around 10 kilograms per meter (7 lb/ft), although thinner and lighter cables are used for deep-water sections.[1]
